Відео

Magical

What if there is no valve seat??

What about a rear wheel, do they get centred as well or are they offaet for allowance of thw cassette.

Thank you. This was the best and most straightforward video I came across 👍

So. When I try to adjust the low clearance on the front, the screw turns freely as it should be moving the cage inward for clearance. But, the cage stays in the same spot.

You are just perfect!!! :)

oh so it's not anti clock wise to tighten. I think that is the mistake i was making

It was either add lubricant to the valve to make it seal, or sealant. I chose sealant and so glad I did. Thanks a whole bunch!

nice

Fixed! thank you!

very good explaining! 😊💦

Just wanna register another "thanks". Valve was leaking, couldn't fix, resorted to watching videos on UA-cam - THIS trick worked. Finally!

Wow nice, physics tutorial..i enjoyed listening

you make it look so easy and I had to try it for my self I just purchased my first mountain bike and the sprocket was a free wheel with a XD FASHION FIT AND IT STARTED MAKING NOISE IN FREE WHEEL MODE I AM A STARTER AND STILL PURCHASING TOOLS TOO FIX THE MATTER

Best way to avoid any broblems with your pressfit BB bike : Just don’t buy one ☝🏻

I believe i tighten Mine too much. so this is the key. Thanks.

Very well done thanks

Great great video! Thank you so much, you helped me a lot!

oh my thanks!

I am gonna give this a try!

Another trip, another need to pack the bike. I know the eroutine but I enjoy the calm and clear voice! Always very helpeful!

Ha! My man! Thank you!

Thanks a million for answering my question - glide wax doesn't decrease the grip, it's the shape that affects it. Now I know. I was worried and nobody could explain this to me :)

Boy how I wish I had found you a lifetime ago!

I've been changing rim tape and adding more sealant and throwing tools for days now and this fixed the issue in a matter of seconds. Hats off to you, sir! One other thing I did to help (maybe not even necessary) was to hold the rim with the valve at the bottom to let all the sealant settle there, then quickly flip it 180 degrees so the sealant can accumulate around the valve bed, then jiggle quickly.

Straight to the point. And great explanation about how it works, instead of only how to fix it.

Hey, thanks for the video, I can't adjust the electronic stop as you did, I get to the limit of the clicks before arriving at 0-0.5mm so I have already dropped the chain The low stop is well adjusted and the top one too, However, either I move away the upper stop of the chain and there I can approach the electronic stopper of the chain but impossible to have the right values by adjusting the two (high and electronic). I noticed a support screw is not even in contact with the frame, I'm lost, I don't want to send it to a mechanic because I tried to follow the Shimano manual...

2024 (and 2022 2023) Vasa. Thank you Saul.

Best waxing video I've found on youtube.

Best klister instructions👍

man , good ! I try it tomorrow

I rarely like a video. But when i do, it's well deserved

FINALLY Finally a proper wheel truing demo. Another win for Canada. Both axis discussion and direction for tool to turn.

Great video. Any additional steps or special care to be taken when there is a metal edge?

How do you know how much to tighten each spring on each side though? Like, how do you know to turn the left side X amount of times then start adjusting from the other side, as opposed to just tightening or loosening one side to even it out?..... If that question makes sense! I was adjusting mine today and I still feel like it's not completely right. Additionally, how to know when to replace the actual calipers?

I love your videos, thank you. That being said, the integrity of the ski is compromised by being broken. Does it perform well? I am assuming that while the ski is functional, it might not actually glide as it should. Probably better off with a new pair of skis. Thoughts?

thanks for sharing this info! great video

Oh, thanks! This saved me 150$

Thanks for the info. Had to laugh when I saw the ski you repaired is just like mine. Was out with my daughter, fell and most of the bottom delaminated. Will be following your advice for repair. The skis are probably 30 years old, so will be replacing them when sales come at end of season. But hoping I can get through this season.

Me and my freinds followed this tutorial at my house when my brakes were not working. Gotta say this vid is more detailed and cleared 😊😊

Always helpful information , Thank you .

After you apply liquid glide wax, do you use a nylon brush to brush it out after it dries or do you just let the liquid wax dry on the ski?

Thank you this was perfect! 👏

What is "Dry Teflon Lube"?

Should be called low wax instead of waxless.

This fixed my issue straight away this is the best video ever

I get it up to 25psi and it just leaks down to 15 in like 20 minutes😐

Thanks a lot. This video helps me to save €20 for the service charge every time to replace the brake pads

This was a great video! I loved the "What if" section! My bike will need an adapter and now I know what I'm looking for, so thank you!

Super helpful video! Planning my Ride tomorrow there ;)